Filter
Top Products
Sense Data Values
133ESL E-Series Tape Library User’s Guide
53B0DMEDIUM DESTINATION ELEMENT FULL
Destination element address already contains a cartridge. Issue a
Read Element Status command and retry move command using your
application software. If the problem recurs, issue an Initialize Element
Status command followed by a Read Element Status command and
retry move command using your application software.
53B 0EMEDIUM SOURCE ELEMENT EMPTY
Source element address does not contain a cartridge. Issue a Read
Element Status command and retry move command using your
application software. If the problem recurs, issue an Initialize Element
Status command followed by a Read Element Status command and
retry the move command using your application software.
B4300SCSI MESSAGE ERROR
Detected message error in message processing on the SCSI BUS.
B4700SCSI PARITY ERROR
SCSI Parity Error detected. Check cable connections and cable
length.
54E 00OVERLAPPED COMMANDS ATTEMPTED
Due to a second command being sent from the same host before a
previous command has completed, the previous command has been
aborted. This may also occur when executing off-line commands via
the control panel and DIAG port simultaneously.
352 00DRIVE REPORTING MEDIA ERROR
The tape drive is indicating that it has detected a problem with the
media. See the tape drive user’s manual for more information.
553 02MEDIUM REMOVAL PREVENTED
Prevent Medium Removal command was executed and command
was received to export cartridge. Execute Allow Medium Removal
command and retry move medium command using your application
software.
Table 22: Sense data values (Hexadecimal) (Continued)
Sense
Key
ASC ASCQ Message Name/Description