Maintenance and Troubleshooting
86 ESL E-Series Tape Library User’s Guide
Interface
Manager card
does not detect
drives or library
SCSI cables not
connected
properly
Check cabling connections.
SCSI settings or
termination not
set properly
■ Check the SCSI settings for the device.
■ Check that the SCSI bus is properly
terminated and ensure the terminator
LEDs indicate a normal state (green).
Timing issues Reset the corresponding FC interface
controller.
Drive not
powered on or
in ready state
■ Make sure the drive isn’t set to off.
■ Troubleshoot the drive.
Table 15: Common Interface Manager issues (Continued)
Symptom Possible Cause Solution