Filter
Top Products
Library Operations
71ESL E-Series Tape Library User’s Guide
For example, if a library has 25 full slots and a sequential slot test is set to run 50
times, the library will test slots 1-25, then begin at 1 again and test through 25. If
you set the same library to run the sequential slot test 60 times, it will test 1-25,
1-25, then 1-10.
To access the
Diagnostics screen, press Diags from the Home screen. The OCP
displays the
Diagnostics screen (see Figure 31).
Figure 31: Diagnostics screen
To perform a diagnostic test:
1. Take the library off-line.
a. Press the OPS button on the OCP to access the Operations screen.
b. Select Cabinet.
c. Use the up and down arrows to take the library off-line.
2. Use the up and down arrows to select the diagnostic test to perform and press
Select.
Robotics Self Test