Filter
Top Products
Specifications A-3
• Print width — 0.25 inch (6.35 mm) right and left margin on
flexible media. Edge-to-edge printing available on rigid
media.
• UV energy source — Dual high-energy, user-replaceable UV
bulbs. User selectable low, medium and high settings.
• Agency compliance
• Safety: CE, UL, c-UL
• Emissions: FCC-A, CE
• Immunity: CE
• Connection to RIP — 25-foot (7.6 m) VideoNet cable
(included). Maximum length: 100 m.
• Operating conditions — 68° to 85° F (20° to 30° C); 20% to
80% relative humidity, non-condensing
• Storage conditions — -30° to 120° F (-34° to 49° C) ; 10% to
80% relative humdity, non-condensing
• Vacuum and pressure systems — maintains negative rela-
tive pressure at the printheads and provides air pressure for
purging. Nominal relative vacuum: 5.0 inches H
2
O. Since rel-
ative pressure is maintained, the printer can be operated at
various altitudes above or below sea level without adjust-
ments to the system.
Electrical Power Power used: 200-240VAC, 50/60 Hz, 16 Amps maximum
Required electrical circuit:
• 220 VAC, 20 Amps, with NEMA L6-20R locking wall recepta-
cle (North America and Japan), OR
• 220 VAC, 16 Amps, single phase, with IEC 60309 wall
receptacle (Europe)
NEMA L6-20R
locking wall receptacle
(North America/Japan)
IEC 60309
wall receptacle
(Europe)