Filter
Top Products
2-4 Configure Printing
The following table shows the print mode and resolution
combinations supported by each of these modes:
BB=Billboard; PQ=Production Quality; HQ=High Quality
The Unsupported Setup Job Handling menu appears.
5. Select an option.
The printer does not print jobs at 600x300 dpi resolution in
High Quality or Billboard mode. If it receives a 600x300 print
job from the RIP when the printer is set to either of these
modes, the job will be handled according to the option you
select:
• Prompt With Options — the control panel will ask
whether to print the job in Production mode or cancel the
job.
• Use Production Quality — the job will be printed in Pro-
duction mode.
• Cancel Job — the job will not be printed.
6. Press an option to select it.
The UV lamps settings appear.
7. Configure the UV lamps operation by pressing the High,
Medium, or Low option.
• For standard media listed in the Media Wizard, leave the
lamp settings at their default values, then adjust as
needed.
• Faster print modes require higher lamp settings to ensure
sufficient curing.
• If the ink is not curing, increase the setting. The lamps
will gradually lose curing effectiveness, so increasing the
setting eventually may become necessary. (For infoma-
tion about UV lamp life, see “Replacing UV Lamp Bulbs”
on page 2-26.)
600x600 600x300 1200x600
Normal BB, PQ, HQ PQ BB,PQ,HQ
Fine Text PQ, HQ — PQ, HQ
Sharp Edge PQ, HQ PQ PQ, HQ