Filter
Top Products
Front Page 3-5
key, the media moves faster. Press the , key to reverse the
media back onto the supply spool. When you press and hold
the , key, the media moves faster. (The same functionality
is provided by the media advance switch on the back of the
printer.)
15. Go Online/Go Offline switch — switches network communi-
cations on and off between the printer and RIP.
16. Sleep/Wake — Sleep Mode powers down the UV lamps,
printheads, carriage, and media drive motors, but maintains
vacuum to the printheads to prevent ink leakage. The printer
automatically enters Sleep Mode at the interval set in the
Printer Settings menu (see page 3-11). If the printer is
awake, the Sleep key displays so you can switch the printer
into Sleep mode. If the printer is asleep, press the Wake
key, or any other key, to “wake” the printer for operation.
17. Advance Media Past Brushes — advances roll-fed media
forward for trimming, then retracts the media back to printing
position.
18. Load (visible when media is not loaded) — loads media. See
“Load and Print on Rigid Media” on page 2-10 and “Load
and Print on Roll-Fed Media” on page 2-15 for instructions.
19. Unload (visible when media is loaded) — raises the pinch
rollers so you can unload the media. The load/unload func-
tionality is also provided by the load/unload switch on the
back of the printer.
20. Attention messages — blinks on the control panel when the
printer detects an error condition, potential error condition,
or when you make a change that requires recalibration or
other action to ensure best print quality. See “Overview” on
page 3-2 for more information.