Filter
Top Products
Load and Print on Roll-Fed Media 2-15
Load and Print on
Roll-Fed Media
1. If opened, retract the rigid media input and output table
extensions, and fold the table legs, tables, and adjustable
media fence down into their storage positions.
2. Load the media onto the supply spool.
Remove the removeable collet from the spool, load the roll
of media onto the spool, and replace the collet. You can print
on either side of the media by loading the spool with the
media feeding off the top or bottom of the roll.
Tip To prevent fingerprints from showing on printed out-
put, wear gloves while handling the media.
Fig. 2-7. Tables stored for roll-fed printing
Fig. 2-8. Media spool
Removeable collet
Fixed collet
Pin