Filter
Top Products
2-12 Settin
g
Up Your New HP Color Copier
Step 9 — Test the Copier
Use the copier’s built-in Self Test to verify that the copier is operating
properly. The Self Test Page lists current front panel settings and, if
you are using Model 145 or 155, tells whether the automatic document
feeder is attached properly.
1
Make sure the Best, Normal, or Fast light is on and not blinking.
2
Press the
Menu
button until the message “Self Test Page” appears
in the panel display.
3
Press the
Select/Resume
button.
The test-page printout has a set of lines which should appear
unbroken, and colored bars which should appear solid. The
intensity of the colors will vary, depending on the type of paper
you are using (that is, plain paper, HP Premium InkJet Paper, and
so on).
For more information, see “How to Clear a Paper Jam in the
Automatic Document Feeder” on page 5-2.
4
To verify proper functioning of your copier, make a copy of the
Self Test Page.
Congratulations! You have finished setting up your HP Color Copier.
Now you are ready to start using it.