Filter
Top Products
Alea Systems, Inc. Rev.1.13 Pingo-Photo Rep
User manual
25
Inspect the head to find any damage that may have been caused by transportation. The proper shape of the
head is shown above.
• Remove the 4 screws securing the top cover to its base
• Lift the Pingo Rep top cover and place it flat on the desk/table
• Take the CD Printer out of its box and place it over the Pingo Rep base top corner
• Locate the CD Printer position adjusting plate and the pins.
• Take the CD Printer with both hands and position it carefully on the bottom of the Pingo Rep base.
• Make sure that the CD Printer holes slide over the adjusting plate pins as shown below.