Filter
Top Products
Alea Systems, Inc. Rev.1.13 Pingo-Photo Rep
User manual
41
18.2 Pingo Photo Error list
“11”: Tray jammed on initialization.
“12”: Tray not at home when “R” command issued.
“13”: Tray did not reach TOF or retracted position.
“14”: Tray did not reverse after reaching TOF.
“15”: Print did not complete within allotted time.
“16”: Printer EEPROM setup is lost.
“17”: Tray did not reach home position from “F” command.
“18”: Tray should be at home, but sensor not indicating correct tray position.
“20”: Printer initializing
“29”: Tray stopped by “S” command.
“30”: Print was canceled, tray home. Status must be reset by “O” command after disc is removed from tray.