9
Chapter 2
Installing the Fibre Loop Switch
The following sections of this chapter provide detailed instructions for installing
a fibre loop switch:
• Unpacking the Fibre Loop Switch
• Installing and Removing GBICs in the Fibre Loop Switch
• Rack Mounting the Fibre Loop Switch
• Powering up a System
• Cabling for the Fibre Loop Switch
Unpacking the Fibre Loop Switch
The fibre loop switch comes packed in a single, integrated shipping box. Retain
the box to reship the switch if necessary. Included are the following items:
• A fibre loop switch
•This HP P4459A 8-Port Fibre Loop Switch Installation & Operation Guide
• Two power cords
• Two HSSDC copper GBICs
• An HSSDC cable
• A rack mount kit
If any parts are missing, contact your sales or service representative.
Note: Only trained personnel should install a loop switch. Please read all
instructions fully before performing the installation.