Filter
Top Products
Configuring gated
Configuring the RIP Protocol
Chapter 356
Figure 3-2 Example of Large RIP Network
A: Cluster Node (or Isolated Node)
You need not run gated at this node, because it is on a LAN with only
one router. Set a static default route to the cluster server (B) in the
/etc/rc.config.d/netconf file as follows:
ROUTE_DESTINATION[0]= "default"
ROUTE_GATEWAY[0]= "130.15.0.6"
ROUTE_COUNT[0]= "1"
A
B
D
C
E
F
A: Cluster Node
Isolated Node
or
B: Root Server
D: Major Router
C: Single Node
E: Major Router
F: Single Node
130.15.0.5
130.15.0.0
(network number)
130.15.0.6 121.1.0.92
121.1.0.0
(network number)
121.1.0.2
134.5.0.1
133.4.0.1
132.5.0.1
121.1.0.10
121.1.0.15
132.6.0.1
131.5.0.2
136.5.0.0
(network number)
136.5.0.1