Filter
Top Products
Configuring gated
Configuring the OSPF Protocol
Chapter 382
value can be an unsigned 31-bit number. You can also specify tag as
as_tag
, where
as_tag
is an unsigned 12-bit number that is
automatically assigned.
• type determines how ASE routes imported into OSPF are treated.
Type 1 routes must be routes from internal gateway protocols with
external metrics that are directly comparable to OSPF metrics.
When OSPF selects a route, OSPF uses the type 1 route’s external
metric and adds the OSPF internal cost to the AS border router. Type
2 routes must be routes from external gateway protocols with metrics
that are not comparable to OSPF metrics. When OSPF selects a
route, OSPF ignores a type 2 route’s metric and uses only the OSPF
internal cost to the AS border router.
Default: 1
• exportlimit specifies the rate at which ASE routes are imported
into the gated routing table for each exportinterval.
Default: 100 (ASE routes)
Range: 0 – 65535
• exportinterval specifies the interval (in seconds) between ASE
exports into OSPF.
Default: 1 (second)
Range: 0 – 2147483647