Filter
Top Products
Configuring gated
Configuring the OSPF Protocol
Chapter 3 71
specified by the routerdeadinterval definition). The value of
pollinterval must be larger than the value of hellointerval. A
sample value for an X.25 network is 2 minutes.
Default: None (you must specify a value)
Range: 0 – 255
• routers specify the list of routers attached to the non-broadcast
network. Routers are defined by their IP interface addresses. You
must define the routers that are eligible to be designated routers as
eligible.
Figure 3-7 shows an example of a router (A) that is connected to an
NBMA network through the interface 193.2.1.35. Two other routers are
also attached to the network: router B is connected through the interface
193.2.1.33 and C is connected through the interface 193.2.1.46. B and C
are eligible to be designated routers.
Figure 3-7 Non-Broadcast Router Interface Example
The following is an example of the non-broadcast interface definition in
router A’s /etc/gated.conf file:
Router
193.2.1.35
A
Router
B
Router
C
193.2.1.46
193.2.1.33
Network
Network
Network
Network
Internet