Filter
Top Products
Configuring gated
Configuring the OSPF Protocol
Chapter 386
The routing table on node A contains routes to 193.2.1.32 and 193.2.1.16.
The routing table on node C in the stub area contains routes only to LAN
1 and a default router.
Accessing the OSPF MIB
HP’s gated also provides ospfagt, an OSPF Simple Management
Network Protocol (SNMP) subagent that supports the OSPF MIB
(Management Information Base) (see RFC 1253). The ospfagt subagent
works with the HP SNMP Agent, snmpdm. If you use an SNMP manager
utility to manage your network, such as HP’s OpenView Network Node
Manager, you can also use HP’s OSPF SNMP subagent.
To start ospfagt automatically during system bootup, set the
environment variable OSPFMIB to 1 in the file
/etc/rc.config.d/netdaemons.
To manually start ospfagt, type the following command at the command
prompt:
/usr/sbin/ospfagt
gated must be running before ospfagt is started. Both gated and
ospfagt must be running to retrieve OSPF MIB objects.
To load the OSPF MIB, select Load/Unload SNMP:MIBS ... from the
Options menu of OpenView.