Filter
Top Products
EnglishEnglish 17
HP 18.1 LCD” Color Monitor User’s Guide
USING Your Monitor
Manual Selection
To manually select an input channel, use the video input button. This
is located beneath the front panel of the monitor next to the Video
Input LED’s.
If you want to receive a signal from a computer connected to
(DVI) select the following.
If you want to receive a signal from a computer connected to
(VGA) select the following:
If two operational computers are connected, the monitor is only able
to detect input from the computer connected to the connector
selected.
NOTE To return to auto selection at any time select AUTO connectors 1
(DVI) and 2 (VGA).
Selecting Input Priority
When your monitor is connected to two computers, you will need to
give priority to one computer. This computer is selected every time
you switch on your monitor and when using auto selection (see “Auto
Selection” on page 16). To choose which computer has priority:
1 Select from the main menu, then press to enter the
INPUT
PRIORITY
submenu.
2 Select
INPUT 1
or
INPUT 2
using the adjustment control, then press
to save your selection and return to the OSD main menu.
1
1
AUTO 2
2
1
AUTO 2
1 : 2