Filter
Top Products
System Setup menu
In the following table, items that have an asterisk (*) indicate the factory default setting.
Menu item Sub-menu item Sub-menu item Sub-menu item Description
Language (List of available
control-panel
display
languages.)
Sets the language in which the control panel displays
messages and product reports.
Paper Setup Default Paper Size Letter
A4
Legal
Sets the size for printing internal reports, faxes, or any
print job that does not specify a size.
Default Paper
Type
Lists available
paper types.
Sets the type for printing internal reports, faxes, or any
print job that does not specify a type.
Tray 1 Paper Type
Paper Size
Select the default size and type for Tray 1 from the list
of available sizes and types.
Tray 2 Paper Type
Paper Size
Select the default size and type for Tray 2 from the list
of available sizes and types.
Paper Out Action Wait forever*
Cancel
Override
Determines how the product reacts when a print job
requires a paper size or type that is unavailable or
when the tray is empty.
●
Wait forever: The product waits until you load the
correct paper.
●
Override: Print on a different size paper after a
specified delay.
●
Cancel: Automatically cancel the print job after a
specified delay.
●
If you select either the Override or Cancel item,
the control panel prompts you for the number of
seconds to delay.
Print Quality Color Calibration Calibrate Now
Power-On
Calibration
Performs a full calibration.
●
Calibrate Now: Performs an immediate
calibration.
●
Power-On Calibration: Specify the length of time
the product should wait after you turn it on before
it calibrates.
Adjust Alignment Print Test Page Use this menu to shift the margin alignment to center
the image on the page from top to bottom and from left
to right. Before adjusting these values, print a test
page. It provides alignment guides in the X and Y
directions so you can determine which adjustments are
necessary.
ENWW
Setup Menu
21