Filter
Top Products
Automatic Configuration
The feature automatically updates the registry and changes the configuration information that
appears on the Device Settings tab.
This setting is disabled by default.
Printer Status Notification
Use this control to enable or disable the product feature that sends printer status notification pop-up
messages for certain product events.
Tray 3 (optional)
Select Installed if this input tray is installed under the printer.
Duplex Unit (for 2–sided printing)
The Duplex Unit allows printing on both sides of the paper.
This setting is enabled by default.
Allow Manual Duplexing
Select the Allow Manual Duplexing item to print on both sides of any supported size and most types
of paper (except transparencies, envelopes, and labels). To use this feature, you must reinsert the
paper stack into the input tray to print the second side. The product pauses while you make this
adjustment.
This setting is enabled by default.
Printer Memory
Specifies the amount of memory in the printer.
Job Separator
Use this control to specify whether a print job identifier page should be printed between print jobs.
This setting is disabled by default.
About tab features
NOTE: The About tab is located on the Printer Properties tab set. For information about how to
access these tabs, see
Printer Properties driver tabs on page 16.
The About tab provides detailed information about driver component versions. It contains an overall
build version number (in parentheses after the model name) together with specific information about
each of the components. The information varies according to the product model number, driver, date,
and versions. The About tab is shown in the following figure.
ENWW
HP LaserJet software components for Windows
55