Filter
Top Products
Server component identification 13
When the system maintenance switch position 6 is set to the On position, the
system is prepared to erase all system configuration settings from both CMOS
and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration
information. Be sure to properly configure the server or data loss could
occur.
For information on emergency ROM backup recovery, refer to ROMPaq disaster
recovery (on page 99
).
System board LEDs
Item LED description Status
1 PPM error Off = Normal
Amber = PPM failed or missing
2 DIMM 4 failure Off = Normal
Amber = DIMM 4 has failed or is missing
3 DIMM 3 failure Off = Normal
Amber = DIMM 3 has failed or is missing
4 DIMM 2 failure Off = Normal
Amber = DIMM 2 has failed or is missing