Filter
Top Products
38 HP ProLiant ML310 Generation 3 Server User Guide
• All DIMMs installed must be the same speed.
BIOS detects the DIMM population and sets the system as follows:
• Single-channel mode: DIMMs installed in one channel only.
• Dual-channel asymmetric mode: DIMMs installed in both channels, but of
unequal capacities per channel.
• Dual-channel interleaved mode: DIMMs installed in both channels with
equal channel capacities.
The following table lists some, but not all, possible configurations. For best
performance, HP recommends dual-channel interleaved mode configurations.
Slot 1A Slot 2A Slot 3B Slot 4B Total memory Mode
512 MB — — — 512 MB Single-channel
512 MB — 512 MB — 1 GB Dual-channel interleaved
1 GB — — — 1 GB Single-channel
1 GB — 1 GB — 2 GB Dual-channel interleaved
2 GB — — — 2 GB Single-channel
2 GB — 2 GB — 4 GB Dual-channel interleaved
2 GB 2 GB 2 GB — 6 GB Dual-channel
asymmetric
2 GB 2 GB 2 GB 2 GB 8 GB Dual-channel interleaved
Installing DIMMs
1. Power down the server ("Powering down the server" on page 21).
2. Remove the bezel ("Unlocking the bezel" on page 22
).
3. Remove the access panel ("Removing the access panel" on page 22
).
4. Open the DIMM slot latches.