HP (Hewlett-Packard) ML310 Server User Manual


 
Server software and configuration utilities 65
In other locations, refer to the HP website (http://www.hp.com).
USB diskette and CD-ROM drives
For driver installation purposes, a USB diskette drive and USB CD-ROM drive
are sufficient.
NOTE: Do not use a USB drive key in place of the diskette drive.
The OS does not support driver installation from a USB drive key.
HP provides both standard USB support and legacy USB support. Standard
support is provided by the OS through the appropriate USB device drivers.
Before the OS loads, HP provides support for USB devices through legacy USB
support, which is enabled by default in the system ROM. HP hardware supports
USB version 1.1 or 2.0, depending on the version of the hardware.
Legacy USB support provides USB functionality in environments where USB
support is normally not available. Specifically, HP provides legacy USB
functionality for:
POST
RBSU
Diagnostics
DOS
Operating environments which do not provide native USB support
For more information on ProLiant USB support, refer to the HP website
(http://h18004.www1.hp.com/products/servers/platforms/usb-support.html
).
HP Integrated Lights-Out Virtual Floppy and CD-ROM drives
iLO 2 Advanced provides diskette drive and CD-ROM drive functionality
through the iLO 2 Virtual Floppy and CD-ROM features.
For detailed information about iLO 2 Advanced, refer to the HP Integrated
Lights-Out User Guide on the HP website (http://www.hp.com/servers/lights-
out).