Filter
Top Products
Hardware options installation 45
4. Install the hard drive.
5. Determine the status of the hard drive from the hot-plug SAS hard drive LED
combinations ("Hot-plug SATA or SAS hard drive LEDs" on page 19
).
6. Install the bezel ("Unlocking the bezel" on page 22
).
7. Resume normal server operations.
SAS controller
1. Power down the server ("Powering down the server" on page 21).
2. Remove the bezel ("Unlocking the bezel" on page 22
).
3. Remove the access panel ("Removing the access panel" on page 22
).
4. Remove the expansion slot cover.