Filter
Top Products
Hardware options installation 41
5. Install a non-hot-plug hard drive into the drive cage.
6. Install the drive cage into the front of the chassis.
7. Connect the data and power cables:
– Non-hot-plug SCSI ("Non-hot-plug SCSI cabling" on page 55
)
– Non-hot-plug SATA ("Non-hot-plug SATA cabling" on page 57
)
8. Replace the access panel ("Removing the access panel" on page 22
).
9. Install the bezel ("Unlocking the bezel" on page 22
).
10. Power up the server ("Powering up the server" on page 21
).