Filter
Top Products
Removal and replacement procedures 16
2.
Slide the rail forward and remove it from the server.
3. Repeat steps 1 and 2 to remove other rail.
To replace the component, reverse the removal procedure.
Power supply blank
Loosen the thumbscrew that secures the redundant power supply blank, and then pull the blank from the
back of the server.
Hot-plug power supply
WARNING: To reduce the risk of electric shock, do not disassemble the power supply or
attempt to repair it. Replace it only with the specified spare part.
CAUTION: Do not attempt to remove and replace a power supply as a hot-plug procedure unless both
bays are populated with power supplies.
To remove the component:
1. Remove the power cord from the unit to be removed.