Filter
Top Products
2-12 Removal and Replacement HP OmniBook 4100/4150
Reassembly Notes
• Before installing the display assembly, make sure a grounding spring is present in each hole at the
back corners of the left and right frames.
Caution
Install new screws for all screws you remove that hold the display hinges. Otherwise, the hinges
could loosen over time.
Hint
• While attaching the LCD flex cable to the base, rest one corner of the display on the bottom
case.
• On the bottom case, the holes for the display screws are marked by “D”. The hole recesses
have flat bottoms for the 16-mm T-head screws and tapered bottoms for the longer 19-mm
flathead screws.