Filter
Top Products
Electronic Forms User Guide
Supported Systems
and Printers
System Support
Since you are using the tutorial it is assumed that your computer has at least the minimum
requirements to run FileMaker Pro and WSDOT electronic forms.
Windows
Pentium class processor with 64 MB RAM
memory
Hard disk drive with at least 70 MB of disk
space free
Windows 95 or later with TruType fonts installed
VGA video adapter
Laser or Ink Jet printer
Macintosh
64 MB RAM memory
Hard drive disk with at least 70 MB of disk
space free
System 7.6.1 or higher
Helvetica and Times normal fonts
Laser or Ink Jet printer
NOTE: The above specifications are minimum
requirements to utilize FileMaker Pro 5.0 and related
software only. Operating additional applications simultaneously may require additional memory.
The following are the minimum requirements to use electronic forms (FileMaker Pro 5.0):
MAC NOTE: Previously we recommended using Arial and Times New Roman TruType fonts on
the Macintosh platform. We have discovered that those fonts installed on a Macintosh will cause
extremely long print times (as much as 3 hours for some multi-page forms). Do not use these fonts.
If you have these fonts installed on your Macintosh system and are experiencing long print times,
removal of these fonts should significantly reduce print times. Contact your computer support staff
for assistance.
Supported Printers:
HP Series 2 HP Series 4000
HP Series 3, 3si HP Series 6000
HP Series 4, 4m, 4m+, 4si HP Deskjet 500, 550, 550c
HP Series 5, 5p, 5si, 5L HP Deskjet Series 600, 700, 800,1100
HP Series 6
The forms have not been tested on dot-matrix printers.
Page clipping may occur with some inkjet printers, but should not be significant enough to cause
problems.
The forms should print on any laser printer with no problems. See the Notes and Warning Section
for known problems with specific printers.
Page 12 - 1
Index