Filter
Top Products
1 With the Macintosh on, insert the Macintosh Format PS
Executive Series Utilities disk in the disk drive.
2 Double-click the PSExec3.
xx
Installer icon.
3 In the PSExec 3.
xx
dialog box that appears, verify the Install
Location.
To change the Install Location you can either use the drop-down
list box to display and select the appropriate disk, or you can
choose the Switch Disk button to scroll through the available
disks.
4 Also in the PSExec 3.
xx
dialog box, choose Easy Install or
Custom Install.
Easy Install automatically installs all of the utilities, including
the PS Exec application; the LaserWriter 8.
x
driver; the PDF,
PDX, and PPD files; and the screen fonts.
Custom Install allows you to choose the options you want to
install.
The amount of available space on your Macintosh hard disk
and the amount of space necessary for all of the selected
options are indicated near the bottom of the window.
» Note:
If you’re using Custom Install, you can click the small
icon (it looks like an
I
inside a square) to the right of each
install option for more information about that option.
5 Click the Install button to begin the installation.
The installation takes approximately one minute. The Installer
places the LaserWriter 8.
x
driver in the Extensions folder inside
the System Folder and all of the other options inside a newly cre-
ated PSExec 3.
xx
ƒ folder in the hard disk window. Also inside this
folder is the Installer log file, which you can view to verify the
installation.