Filter
Top Products
—
GS
Getting Started
manual
O
Operation
manual
R
Reference
manual
Error messages
Engine error 2 (O)6-12
Engine error 3 (O)6-12
Engine error 4 (O)6-12
Engine error 6 (O)6-12
Format failed (R)4-29, (R)6-67
Hard disks (R)6-67
HP-GL error codes (O)6-12
Paper size mismatch (O)2-6, (O)6-10
PCL error codes (O)6-13
See also Status messages
Waiting for idle (O)6-10
Waiting on input end job (O)6-11
Write Error (R)6-67
Error messagesEngine error 7 (O)6-12
ESP (R)5-24
Printing modes (R)5-2
Setting parameters (R)4-14
Timeout (R)4-65
Troubleshooting (O)6-20
ESP Default Emul menu (R)4-14
ESP Timeout menu (R)4-65
Ethernet
10Base2 (GS)4-3
10BaseT (GS)4-3
Cable pinouts, 10Base2 BNC (R)B-12
Cable pinouts, 10BaseT RJ45 (R)B-12
Interface (GS)1-17, (GS)4-2, (R)6-37
QMS CrownNet System
Administrator’s Guide (GS)1-3
See also Ethernet port
Thin-wire Ethernet (GS)4-3
Twisted-pair Ethernet (GS)4-3
Ethernet port
BNC connector (GS)4-3
Configuration, network (GS)4-14
Configuration, port (GS)4-10
Connection (GS)4-3
CrownAdmin software, DOS (GS)4-5
CrownAdmin software, Macintosh
(GS)4-5
CrownNet software, OS/2 (GS)4-6
Parameters, setting (R)4-31
RJ45 connector (GS)4-3
See also Ethernet
Software installation (GS)4-4
EtherTalk (GS)4-2
Configuration, Ethernet port (GS)4-11
Configuration, network (GS)4-14
Example, configuration (R)5-23
Excess memory (R)5-11
Expand Mode menu (HP-GL) (R)4-15
External hard disks (R)B-13
Factory defaults, restoring (R)4-11
FCC compliance (R)D-2
Features
Crown (GS)1-11
Printer (GS)1-7
FF is CRFF menu (Lineprinter) (R)4-25
File
Swap (R)4-48
Flash ROM (R)5-13, (R)6-83, (R)6-84,
(R)6-88, (R)6-89
System software, updating (R)6-75
Flow control
Hardware (R)4-37
Software, receive (R)4-39
Software, transmit (R)4-40
Font cache (R)5-18
Font card (R)6-17, (R)6-18
Note (R)6-17
Removing (R)6-17
Using (R)6-16
Font index number (R)C-6
Font menu (Lineprinter) (R)4-24