Filter
Top Products
Overview of Installation and Configuration
Allowable Values for HP VLANs
Chapter 2 29
Allowable Values for HP VLANs
Table 2-2 lists the allowable values for configuring VLANs in the
/etc/rc.config.d/vlanconf file. It describes the parameter functions,
default values, and allowable ranges.
For the format of the /etc/rc.config.d/vlanconf file, refer to
“Configuring VLANs by Editing vlanconf File” in this document.
Table 2-2 Allowable Values for Parameters in vlanconf File
Parameter --
description
Range and
Restrictions
Default Type
VLAN_ID -- VLAN ID 0 - 4094; unique within
NIC
1 VLAN ID per VLAN;
None Integer
VLAN_PRIORITY --
802.1p priority for
outbound VLAN
frames
0 - 7 0 Integer
VLAN_TOS -- Type of
Service value
0 - 255 0 Integer
VLAN_PRI_OVERRIDE
-- Priority Override
level
CONF_PRI/
IP_HEADER/
CONF_TOS
CONF_PRI Case-sensitive
character
string.
VLAN_TOS_OVERRIDE
-- Type of service
Override Level
IP_HEADER/
ETHER_HEADER/
CONF_TOS/
CONF_PRI
IP_HEADER Case-sensitive
character
string.
VLAN_NAME -- VLAN
name
31 chars; keyword not
allowed; unique within
NIC;
1 VLAN name per VLAN
None
1
Alphanumeric
character string.
Case-sensitive
VLAN_VPPA -- Virtual
PPA number
starts at # 5000;
1 VPPA per
vlanid; unique per system
None Integer