Filter
Top Products
Configuring VLANs by Editing vlanconf File
Modifying Parameters in vlanconf File
Chapter 4 45
# priority. Only for
# IP packets. For non-IP
# packets, CONF_PRI
# will be used.
# CONF_TOS - User specified ToS, taken
# from VLAN_TOS[] will be
# converted to
# 802.1p priority.
#
# VLAN_TOS_OVERRIDE : Inbound ToS value to be used for IP
# packets.
# Allowed ToS override levels are as follows:
#
# IP_HEADER - ToS value in the IP
# header will be used
# (default if not
# specified).
# ETHER_HEADER - Ether header 802.1p
# priority will be
# converted to ToS
# value.
# CONF_TOS - ToS specified by the user
# will be used.
# CONF_PRI - 802.1p priority given in
# VLAN_PRIORITY[] will
# be converted to ToS
# value.
#
# VLAN_NAME : Name of the VLAN. Its a simple string,
# which consists of alphanumeric
# characters. No special characters
# allowed.
#
# VLAN_VPPA : User requested VPPA for the VLAN Virtual
# Interface that will be created by the
# information given above. If not
# specified system will assign a VPPA.
#
#
# For each VLAN configuration, add a set of variable # assignments like the ones
below, changing the index to “[1]”, # “[2]” et cetera.
##############################################################
#
# Sample Entry
#
# VLAN_PHY_INTERFACE[1]=