Troubleshooting
Flowchart 2: Network Level Tests
Appendix A 71
Flowchart 2b (continued) Procedures
• If network unreachable error, go to the Configuration Tests.
• If no response from ping, validate switches in path support VLANs
and remote host supports them as well. Otherwise, reconfigure
network path, or configure VLANs on remote host and/or switches
then repeat ping Test. Return to linkloop test.
• If you receive an unknown hosts error, add the missing host name
and repeat ping Test.
• If you receive “error=SendTo: No route to host”, then using route
add route table entry for the missing host and repeat ping Test.
Otherwise, call HP.