Filter
Top Products
NOTE: You don’t need to set a SCSI address for Plug and
Play SCSI devices (SCSI devices which support the
SCAM protocol).
2 Connect the SCSI accessory to your PC’s external SCSI connector with a shielded SCSI
cable. (Note that Ultra SCSI is automatically disabled when an external SCSI accessory is
connected.)
3 Make sure the SCSI accessory is terminated correctly—either internally or by a
terminating resistor (refer to the manual provided with the SCSI accessory).
Make sure the SCSI
accessory is terminated
4 Refer to the manual provided with the SCSI accessory to learn how to install any software
that may be necessary to use it.