Filter
Top Products
5 Replace the MGA video adapter in the computer.
6 Install any other accessories before replacing the cover (see "Removing and Replacing
the Cover" earlier in this chapter). Reconnect all cables and power cords.
Completing the Video Memory Installation Procedure
1 Switch on the PC.
2 Check that the Setup program has detected and configured the Video memory.
NOTE If you need to use a special video driver for your
application, you may be asked to insert the CD-ROM
or diskette containing the driver.
Video Adapter accessories available from other sources
Additional accessories, including memory upgrades and a video MPEG module, are available
for your video adapter. However, these accessories cannot be ordered from HP. Contact your
dealer for more details about these accessories.
INSTALLING ACCESSORY BOARDS
The PC has six accessory board slots:
• Slot 1 (the bottom slot) for full-length 16-bit ISA boards
• Slot 2 for full-length 16-bit ISA boards
• Slot 3 for either a full-length 32-bit PCI or a 16-bit ISA board
• Slot 4 can be used for a full-length 32-bit PCI board
• Slot 5 for a full-length 32-bit PCI board
• Slot 6 (the top slot) for a full-length 32-bit PCI board.
CONFIGURING ACCESSORY BOARDS WITH PLUG AND PLAY