Filter
Top Products
NOTE These options may not be available if Windows 95 is
installed on your computer.
Configuring Audio
Use these options to reserve system resources for the computer’s integrated SoundBlaster™
audio interface.
If you do not want to use the audio interface, you should highlight the Audio Interface option
and select Disabled. This will make more system resources available for other system
components.
Audio
Audio Interface . . . . . . . . . Enabled/Disabled
Base I/O Address . . . . . . . . 220/240/260/280
IRQ Channel . . . . . . . . . . . 5/7/10
8-bit DMA Channel . . . . . . . . 1/3
16-bit DMA Channel . . . . . . . 5/7
MIDI Port base I/O address . . . 330h/300h
Joystick/Game Port . . . . . . . Enabled/Disabled
Configuring the Video Adapter
Most of these video options are preconfigured for optimal video performance.
If your display is “Plug and Play” (supports Display Data Channel), highlight Plug and Play
Display and select Enabled.
Video
Plug and Play Display . . . . . . On/Off
If you install more video memory, ensure that the Setup program detects it and configures the
Video Memory size correctly. If it is wrong, check that the memory module is installed
correctly.
Selecting the IRQs Used by Accessory Boards
If you have installed an ISA accessory board that uses IRQ 9, 10, 11, or 15, you must highlight
the IRQ
x
line and select Used by an ISA Board. This allows PCI devices to be automatically
configured. You should always leave at least one IRQ free for use by the installed PCI devices.
IRQ Map for Accessory Boards
IRQ 9 . . . . . . . . . . . . . . Used by an ISA Board
IRQ 10 . . . . . . . . . . . . . . Available for PCI
IRQ 11 . . . . . . . . . . . . . . Available for PCI
IRQ 12 . . . . . . . . . . . . . . Available for PCI
IRQ 12 used for . . . . . . . . . . Mouse/Accessory Board