Filter
Top Products
Lock the cover
(at the back of
the computer)
Push the
latches down
to secure the
cover
7 If required, lock the cover using the key.
8 Reconnect all cables and power cables.
MOVING THE POWER SUPPLY
You can slide the power supply unit out of the computer to improve access to the system board
and the cables at the rear of the disk drives.
1 Disconnect the computer’s power cord and any telecommunications cable.
2 Remove the computer’s cover (see "Removing and Replacing the Cover" earlier in this
chapter).
3 Unscrew the two self-retaining screws at the back of the power supply.