Filter
Top Products
This script will assist the user develop and distribute a set of Serviceguard
package configuration template files and associated start, stop and monitor scripts.
The templates generated by these scripts will handle many guest configurations,
but it is only a template and may not be appropriate for your particular
configuration needs. You are encouraged to review and modify these template
files as needed for your particular environment.
Do you wish to continue? (y/n):y
[Virtual Machine Details]
Virtual Machine Name VM # OS Type State #VCPUs #Devs #Nets Memory Runsysid
==================== ===== ======= ========= ====== ===== ===== ======= ========
compass1 1 HPUX Off 1 5 1 512 MB 0
[Storage Interface Details]
Guest Physical
Device Adaptor Bus Dev Ftn Tgt Lun Storage Device
====== ========== === === === === === ========= =========================
disk scsi 0 0 0 0 0 disk /dev/rdsk/c12t0d0
disk scsi 0 0 0 1 0 lv /dev/vgsglvm/rlvol1
disk scsi 0 0 0 2 0 file /hpvm/g1lvm/hpvmnet2
disk scsi 0 0 0 3 0 lv /dev/vx/rdsk/sgvxvm/sgvxvms
disk scsi 0 0 0 4 0 file /hpvm/g1vxvm/hpvmnet2
disk scsi 0 0 0 5 0 disk /dev/rdsk/c12t0d5
[Network Interface Details]
Interface Adaptor Name/Num Bus Dev Ftn Mac Address
========= ========== ========== === === === =================
vswitch lan vswitch2 0 1 0 ea-5c-08-d3-70-f2
vswitch lan vswitch5 0 2 0 f2-c7-0d-09-ac-8f
vswitch lan vswitch6 0 4 0 92-35-ed-1f-6c-67
Would you like to create a failover package for this Virtual Machine summarized above? (y/n):y
Would you like to distribute the package to each cluster member? (y/n):y
The failover package template files for the Virtual Machine were successfully created.
The script asks you to confirm the following actions:
• Creating a failover package
• Distributing the package to all the cluster nodes
Respond to both prompts by entering y. The hpvm_package.sh script creates the virtual machine
package template files in the etc/cmcluster/guest-name/ directory:
• guest-name.config
• guest-name.sh
• hpvmsg_ctrl
• hpvmsg_mon
• hpvmsg_start
• hpvmsg_stop
The hpvmsg_package is a utility that you can use to configure a guest as a Serviceguard package.
The utility uses the guest name that you supply as an argument to create and populate the
/etc/cmcluster/guest-name/ directorywith aset of templatefiles thatcontain basic Serviceguard
parameter settings. HP recommends that you review and modify these template files as needed for
your specific multiserver environment. For more information, see “Modifying the Package
Configuration Files” (page 123) and the Managing Serviceguard manual.
10.3 Serviceguard in VM Host Configuration 121