Filter
Top Products
7.8.2 Displaying VLAN Information
You can display the vswitches and ports on a vswitch used by a guest using the hpvmstatus command.
For example,to display the network informationabout the guest namedvm1, enter thefollowing command:
# hpvmstatus -P vm1
.
.
.
[Network Interface Details]
Interface Adaptor Name/Num PortNum Bus Dev Ftn Mac Address
========= ========== ========== ======= === === === ==============
vswitch lan localnet 1 0 1 0 de-19-57-23-74-bd
vswitch lan localnet 2 0 2 0 7a-fb-4e-68-4f-5f
vswitch lan vmlan4 1 0 4 0 16-e8-c6-fa-b5-bc
vswitch lan vmlan4 2 0 5 0 fa-18-82-9f-1a-95
vswitch lan vmlan900 1 0 6 0 86-81-0b-6d-52-36
vswitch lan vmlan900 2 0 7 0 6a-b9-cf-06-02-94
.
.
.
The preceding example shows the Network Interface Details portion of the hpvmstatus display. In the
list of network interfaces, note that each virtual network connection is associated with either port 1 or port
2 of several vswitches. The vswitch named vmlan4 is associated with Bus/Dev/Ftn 0/4/0 on port 1, and
with 0/5/0 on port 2.
To disable a VLAN, use the following command:
# hpvmnet -S vswitch-name -u portid:portnum:vlanid:none
To display information about a specific VLAN port, include the —p option to the hpvmnet command. For
example, displayVLAN informationfor port 2on thevswitch namedvmlan4, enter thefollowing command:
# hpvmnet -S vmlan4 -p 2
Vswitch Name : vmlan4
Max Number of Ports : 100
Port Number : 2
Port State : Active
Active VM : vm1
Untagged VlanId : 100
Reserved VMs : vm1
To view the all the VLANs defined on the vswitch named vlan4, enter the following command:
# hpvmnet -S vmlan4 -p all
Vswitch Name : vmlan4
Max Number of Ports : 100
Configured Ports : 4
Port Number : 1
Port State : Active
Active VM : vm1
Untagged VlanId : none
Reserved VMs : vm1
Port Number : 2
Port State : Active
Active VM : vm1
Untagged VlanId : 100
Reserved VMs : vm1
Port Number : 3
7.8 Configuring VLANs 97