Filter
Top Products
The Command Prompt session was successfully launched.
SAC>
2. Inresponse to the following prompt, press the ESC key quickly followed by the TAB key. Then press
Enter to change to the new command channel:
Press <esc> <tab> for next channel.
Press 0 to return to the SAC channel.
Use any other key to view this channel.
X:\ia64\system32>
3. At the command prompt, type txtrestore and press Enter:
X:\ia64\system32> txtrestore
This is txtrestore.cmd Batch file
Microsoft Windows [Version 5.2.3790] (C) Copyright 1985-2003 Microsoft Corp.
You are about to install Windows Server on the following drive:
Drive 0: HP Virtual Disk SCSI Disk Device (36GB) Bus Number 0, Target ID 0, LUN 0 H
Attached to SCSI Controller In Embedded Slot (PCI bus 0, device 0, function 0)
Drive Layout: Partition table style is MBR
Signature = 0C9C0C9C
WARNING: If you continue with the installation, all data, including
partition table information, on the above drive will be erased
and permanently lost.
Continue with installation (Y/N)? y
Enter y to continue using the specified device. To use a different device, enter n.
4. If you continue, the following information is displayed:
Target drives set to default.
TARGETHDD=0
TARGETPQI=1
ImageDrive=X:
ImagePath=\Images
ScriptDrive=X:
ScriptPath=\IA64\ADDINS
Support=X:\Supp
IVPQET2373ALABA.PQI
=================================================================
Note: <Ctrl/C> Will always exit.
========================== TASK MENU ============================
A - 16GB Drive Partition Size.
B - 33GB Drive Partition size.
C - Full Drive size.
Q - Exit to console.
=================================================================
Select a task by typing a letter A, B, C or Q and then press enter:
WARNING, SELECTING A, B OR C WILL ERASE THE DATA ON BOOT DRIVE.
Input : c
50 Creating Windows Guests