HP (Hewlett-Packard) X585f Printer User Manual


 
Set up Save to Network Folder
Use the following information to configure a Save to Network Folder quick set.
Use the Save to Network Folder Quick Set Wizard
Set up Save to Network Folder via the HP Embedded Web Server
Complete the destination folder settings
Use the Save to Network Folder Quick Set Wizard
Some HP products include driver installation from a software CD. At the end of this installation is an option to
Setup Scan to Folder and Email. This option opens the setup wizards that are in the HP Embedded Web
Server (EWS) for the product. The setup wizards include the options for basic configuration.
To begin, click Save to Network Folder Quick Set Wizard. Follow the instructions on the screen. Click Next to
advance to the next step in the wizard.
For more detailed setup information, see the sections that follow to configure this feature through the
complete set of Save to Network Folder options.
Set up Save to Network Folder via the HP Embedded Web Server
1. Open the HP Embedded Web Server (EWS):
a. From the Home screen on the product control panel, touch the Network
button to display the IP
address or host name.
b. Open a Web browser, and in the address line, type the IP address or host name exactly as it
displays on the product control panel. Press the Enter key on the computer keyboard. The EWS
opens.
2. Click the Scan/Digital Send tab.
3. On the left navigation menu, click Save to Network Folder Setup link.
4. On the Save to Network Folder Setup dialog, select the Enable Save to Network Folder check box.
NOTE: The Save to Network Folder feature can be minimally configured by selecting this check box
and not creating a quick set. However, for this basic configuration, the user must enter the destination
folder information at the control panel for each scan job. A quick set is required to include Save to
Network Folder metadata.
5. Under the Quick Sets section, click Add.
6. On the Set the button location for the Quick Set and options for user interaction at the control panel
dialog, enter a title and description for the Save to Network Folder quick set. Select the button location
for the quick set and the quick set start option. Click Next.
7. On the Folder Settings dialog, click Add to create a destination folder. Set the options to use and click
Next.
NOTE: For additional help with folder settings, see Complete the destination folder settings
on page 57.
56 Chapter 6 Scan/send ENWW