HP (Hewlett-Packard) Z5200 All in One Printer User Manual


 
Cannot access the Embedded Web Server
Have you set a password for the Embedded Web Server, and then forgotten the password? If so, go
to the front panel and select the Setup menu icon
, then Front panel options > Resets > Reset
EWS password. Otherwise, please continue reading this section.
If you have not done so already, please read
Access the Embedded Web Server on page 20.
NOTE: If you connect directly to your printer with a USB cable, use the HP Utility.
1.
From the front panel, select the Connectivity menu icon
.
2. Select Advanced > Allow EWS > On.
3.
If you have a TCP/IP connection to your printer, select the Connectivity menu icon again.
4. Select the type of connection you are using.
5. Select View Information.
6. Ensure that you see IP enabled. If not, you may need to use a different connection.
If you are using a proxy server, try bypassing the server and accessing the Web server directly.
In Internet Explorer 6 for Windows, go to Tools > Internet Options > Connections > LAN
Settings, and check the Bypass proxy server for local addresses box. Alternatively, for more
precise control, click the Advanced button and add the printer's IP address to the list of
exceptions, for which the proxy server is not used.
In Safari for Mac OS, go to Safari > Preferences > Advanced and click the Proxies: Change
Settings button. Add the printer's IP address or its domain name to the list of exceptions, for
which the proxy server is not used.
If you still cannot connect, switch the printer off and back on with the Power key on the front panel.
Automatic file system check
When you turn on the printer, you occasionally see a front panel display similar to the one shown
below.
A file system check is taking place; it can take up to 40 minutes. Please wait until it finishes.
CAUTION: If you turn the printer off before the file system check has finished, the file system could
be seriously damaged, making the printer's hard disk unusable. In any case, the file system check
restarts from the beginning whenever you turn the printer on.
170 Chapter 15 Troubleshooting general printer issues ENWW
General printer issues