Filter
Top Products
NOTE: If you have disabled skew checking, the paper length is estimated as four times the
width.
TIP: If your document is 330 × 483 mm (13 × 19 in), designed to fit on sheet paper of the same size,
select the document size Super B/A3.
Custom paper sizes
To choose a non-standard paper size not shown in the list of paper sizes:
●
Under Windows, there are three different ways:
◦ In the driver dialog, press the Custom button in the Paper/Quality tab, then specify the
name and the dimensions of your new paper size, then click Save to save your new paper
size. In the PostScript driver, to see your new custom size in the list of custom sizes, you
need to exit the printer properties, then reenter them (and use the More button if
necessary).
NOTE: The driver will not allow you to create a paper size whose width exceeds its
length.
◦
From the Start menu, select Printers, then from the File menu select Server Properties.
In the Forms tab, check the Create a new form box, specify the name and dimensions of
the new form, then click Save Form.
NOTE: Such forms are not available when using a shared printer that is connected to a
different computer.
◦
The PostScript driver offers a special way of defining a custom paper size for the current
session only. Select the Advanced tab, then Paper/Output > Paper Size. Select
PostScript Custom Page Size from the paper size list, then specify the paper dimensions,
then click OK to save the new dimensions of the PostScript Custom Page Size, which
appears in the list of custom sizes available in the Paper/Quality tab. Your new page size
is saved until you exit your current application, after which the PostScript Custom Page
Size remains in the list but reverts to its default dimensions.
● In the Mac OS Page Setup dialog: select Paper Size > Manage Custom Sizes.
NOTE: If your application offers no Page Setup dialog, please use the Print dialog.
●
On the Embedded Web Server's Submit Job page: select Advanced settings > Paper >
Page size > Custom.
Select margins options
By default, the printer leaves a 5 mm margin between the edges of your image and the edges of the
paper (17 mm at the foot of a sheet of paper). However, you can change this behavior in several
ways.
●
In the Windows driver dialog: select the Paper/Quality tab and then the Margins/Layout
button.
TIP: In the Windows PostScript driver, make sure you have made the right choice from the
Document size list. You should select a 'no margins' document size if you intend to use the
Oversize, Clip Contents By Margins or Borderless options.
●
In the Mac OS Print dialog (PCL3 driver): select the Paper/Quality panel and then Layout.
●
In the Mac OS X 10.4 Print dialog (PostScript driver): select the Finishing panel and then
Layout.
ENWW Select margins options 47
Printing