Filter
Top Products
Ch 4: System Environment Settings
Hitachi PC VisionBase8450H/R Server 101
4. Press key or choose [Exit this menu].
The following menu is displayed. Unless you changed settings in step 2, you will return to the Main Menu.
5. Choose [Save Changes].
This saves the settings and returns to the Main Menu. If you want to return to the Main Menu without saving the
settings, choose [Cancel Changes]. To not return to the Main Menu, choose [Cancel Exit].
SCAM Support
Used to specify whether or not to have SCSI IDs automatically assigned to SCSI devices that support the SCAM
(SCSI Configured Automatically) protocol. Specifying “On” enables the SCSI controller to automatically assign
SCSI IDs to the SCSI devices that support the SCAM protocol. In ordinary circumstances, use the default “Off”.
• On: Effective
• Off: Ineffective (default)
Parity
Used to specify whether or not to make a parity check for the SCSI bus effective. In ordinary circumstances, use the
default “On”.
• On: Effective (default)
• Off: Ineffective
Host SCSI ID
Used to set an SCSI ID for the SCSI controller. In ordinary circumstances, use the default “7”.
• 0–15: (“7” is the default)
Scan Order
used to set the order of scanning SCSI devices. In ordinary circumstances, use the default “Low to High (0..Max)”.
• Low to High (0..Max): In ascending order of SCSI ID (default)
• High to Low (Max..0): In descending order of SCSI ID
Removable Media Support
Used to specify whether or not to control removable devices by BIOS. In ordinary circumstances, use the default
“None”.
• None: Not controlled by BIOS (default).
• Boot Drive Only: Only the boot drive is controlled by BIOS.
• With Media Installed: All removable devices are controlled by BIOS.