Filter
Top Products
Ch 3: Error Information
54 Hitachi VisionBase 8880R
System Beeps
The system will beep before initializing video and does not always indicate an error. However, the system will
notify you of specific errors using beep patterns. A beep pattern is a meaningful series of beeps and pauses, such as
a 1-3-1-1 pattern, when the system beeps once, briefly pauses, beeps 3 times and briefly pauses, beeps once and
briefly pauses, and beeps one last time to indicate a DRAM refresh failure.
The following table displays the beep patterns that you may encounter and the error that is being reported.
0505 05 Expansion ROM not initialized—PCI (controller
Name)
BIOS setup
0506 06 Warning: IRQ not configured—PCI (controller Name) BIOS setup
0602 02 Serial port x configuration error—device disabled BIOS setup
Beep pattern 7 Seg. Port 80 Error
1-2 Search for option ROMs. Check sum failure
1-3-1-1 20 DRAM refresh failure
1-3-1-3 22 Keyboard failure
1-3-3-1 28 Memory failure
1-3-3-2 29 Memory failure
1-3-4-3 2E Memory failure
1-4-2-1 34 RTC R/W test failure
2-1-2-1 44 Check sum failure
2-2-3-1 58 Abnormal interrupt
4-2-4-3 DE Miss recognition RAM capacity
4-2-4-4 DF Code check failure
4-4-3-3 FA Code check failure
Code 7 Seg.
Port 80
Error Message Root parts Root cause