Hitachi CP-WX4021N Projector User Manual


 
9
Setting up
Arrangement (continued)
• Position the projector to prevent light from directly hitting the
projector's remote sensor.
• Do not place the product in a place where radio interference may be caused.
• Keep heat-sensitive things away from the projector. Otherwise, they may be
damaged by the heat from the projector.
Do not install the projector near thermally conductive or
ammable things. Such things when heated by the projector could result in a
re and burns.
Do not place the projector on a metal stand.
Do not place the projector where any oils, such as cooking or machine
oil, are used. Oil may harm the product, resulting in malfunction, or falling from
the mounted position.
Do not place the projector in a place where it may get wet. Getting the
projector wet or inserting liquid into the projector could cause a re and an
electric shock, and damage the projector.
Do not place the projector near water, such as in a bathroom, kitchen, or
poolside.
Do not place the projector outdoors or by the window.
Do not place anything containing liquid near the projector.
WARNING
Place the projector in a cool place with sufcient
ventilation. The projector may shutdown automatically or may malfunction if its
internal temperature is too high.
Using a damaged projector could result in a re and an electric shock.
Do not place the projector in direct sunlight or near hot objects such as heaters.
Keep a space of 30 cm or more between a side of the projector and other
objects such as walls.
Do not place the projector on carpet, cushions or bedding.
Do not stop up, block nor cover the projector's vent holes. Do not place
anything around the projector that could be sucked in or stuck to the projector's
intake vents.
Do not place the projector at places that are exposed to magnetic elds, doing
so can cause the cooling fans inside the projector to malfunction.
Avoid placing the projector in smoky, humid or dusty place. Placing the
projector in such places could cause a re, an electric shock and malfunction of
the projector.
Do not place the projector near humidiers. Especially for an ultrasonic
humidier, chlorine and minerals contained in tap water are atomized and could
be deposited in the projector causing image degradation or other problems.
Do not place the projector in a smoking area, kitchen, passageway or by the
window.
CAUTION
NOTICE