Hitachi CP-WX4021N Projector User Manual


 
31
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table
below can be performed.
Select an item using the / cursor buttons. Then
perform it according to the following table.
Item Description
ASPECT
Using the / buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu (
36).
AUTO KEYSTONE
Using the button executes the auto keystone function.
See the AUTO KEYSTONE item in SETUP menu (
43).
KEYSTONE
Using the / buttons corrects the vertical keystone distortion.
See the
KEYSTONE item in SETUP menu (
43).
KEYSTONE
Using the / buttons corrects the horizontal keystone distortion.
See the
KEYSTONE in SETUP menu (
44).
PERFECT FIT
Pressing the button displays the KEYSTONE_PERFECT FIT
dialog. See the PERFECT FIT item in SETUP menu (
44).
PICTURE MODE
Using the / buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR TEMP
settings. Choose a suitable mode according to the projected source.
NORMAL
Ù
CINEMA
Ù
DYNAMIC
Ù
BOARD(BLACK)
DAYTIME
Ù
WHITEBOARD
Ù
BOARD(GREEN)
GAMMA COLOR TEMP
NORMAL 1 DEFAULT 2 MID
CINEMA 2 DEFAULT 3 LOW
DYNAMIC 3 DEFAULT 1 HIGH
BOARD(BLACK) 4 DEFAULT 4 Hi-BRIGHT-1
BOARD(GREEN) 4 DEFAULT 5 Hi-BRIGHT-2
WHITEBOARD 5 DEFAULT 2 MID
DAYTIME 6 DEFAULT 6 Hi-BRIGHT-3
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and
COLOR TEMP (
33, 34) items in PICTURE menu.
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
(continued on next page)