Hitachi CP-WX4021N Projector User Manual


 
76
SECURITY menu
Item Description
MY TEXT
DISPLAY
(1) Use the / buttons on the SECURITY menu to
select the MY TEXT DISPLAY and press the or
ENTER button to display the MY TEXT DISPLAY
on/off menu.
(2) Use the / buttons on the MY TEXT DISPLAY on/off menu to select
on or off.
ON
Ù
OFF
When it is set ON, the MY TEXT will be displayed
on the START UP screen and the INPUT_
INFORMATION when the INFORMATION on the
SERVICE menu is chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the OFF.
MY TEXT
WRITING
(1) Use the / buttons on the
SECURITY menu to select the MY
TEXT WRITING and press the
button. The MY TEXT WRITING dialog
will be displayed.
(2) The current MY TEXT will be displayed
on the rst 3 lines. If not yet written, the
lines will be blank.
Use the /// buttons and the
ENTER or INPUT button to select and
enter characters. To erase 1 character
at one time, press the RESET button or
press the and INPUT button at the
same time. Also if you move the cursor
to DELETE or ALL CLEAR on screen
and press the ENTER or INPUT button,
1 character or all characters will be
erased. The MY TEXT can be input up
to 24 characters on each line.
(3)
To change an already inserted character,
press the / button to move the
cursor to one of the rst 3 lines, and use
the / buttons to move the cursor on
the character to be changed.
After pressing the ENTER or INPUT button, the character is selected.
Then, follow the same procedure as described at the item (2) above.
(4) To nish entering text, move the cursor to the OK on screen and press
the , ENTER or INPUT button. To revert to the previous MY TEXT
without saving changes, move the cursor to the CANCEL on screen and
press the , ENTER or INPUT button.
The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to OFF.
SECURITY
INDICATOR
Selecting this item displays the SECURITY INDICATOR dialog. Use the
/ buttons to select ON or OFF.
ON
Ù
OFF
When ON is selected while PIN LOCK or TRANSITION DETECTOR is ON,
the SECURITY indicator blinks in the standby state (
73, 74).
STACK LOCK
Selecting this item displays the STACK LOCK dialog. For more information
about this menu, check our web site (
User's manual (concise)).