Hitachi CP-WX4021N Projector User Manual


 
15
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by LAN communicaton, an external
device that is connected with this projector by RS-232C communication can be
controlled from the computer as a network terminal.
For details, see the 3.7 Controlling the external device via the projector(using
the NETWORK BRIDGE function) - Network Guide.
Connection
1.
Connect the computer's LAN port and the projector's LAN port with a LAN
cable.
2.
Connect the projector's CONTROL port and the RS-232C port of the
devices that you want to control with a RS-232C cable.
3.
Turn the computer on and after the computer has started up turn the projector
on.
4.
Set the COMMUNICATION TYPE to NETWORK BRIDGE. (OPTION menu -
SERVICE - COMMUNICATION in the User's Manual - Operating Guide)
Network Bridge Communication
Network Bridge Communication
LAN
CONTROL
LAN
RS-232C