Filter
Top Products
HiTi 640 DL Photo Printer User Manual Setting up Your Printer
www.hi-ti.com 5
Setting up Your Printer
1. Connect the power cord to the power connection.
2. Connect the printer to your computer using the USB cord.
3. Insert the ribbon cartridge into the printer. For more
information, see Installing or Replacing Ribbon Cartridges
on Page 6 of the user guide.
4. Place paper into the paper cassette. For more information
regarding how to load the paper, see Loading Paper on
Page 7 of the user guide.
5. Turn the printer power switch on. The green led light
blinks and becomes stable after 5 seconds. Before you
turn on the power switch, make sure the printer driver
software is installed in your personal computer.
6. The New Hardware Found message box appears on the
screen of your computer. Windows starts to install the
printer driver software by copying files to your computer.
For more information about installing printer driver, see
Printer Driver Details on Page 59 of the user guide.
to computer
to power connection
hiti640.book Page 5 Monday, June 24, 2002 2:46 PM