Filter
Top Products
LED Signal Lights Hi-Ti 640 DL Photo Printer User Manual
www.hi-ti.com 45
Red Signal Light
Indicate problems and notify users a problem occurs on the printer. Different blinking times indicate different
problems.
Blinking Times Reason Solutions
1 Ribbon door is opened. Close the top cover of the printer.
2 No ribbon cartridge installed. Install a ribbon cartridge.
3 Run out the ribbon cartridge. Replace the old ribbon cassette with a new one.
4 No paper left in the paper
cassette.
Place more paper to the paper cassette.
5 Paper jammed. Remove the paper jammed. If you can’t remove the paper,
turn off the printer and then turn it on about 1 minute later. The
printer will move it out automatically.
Note: The Ribbon Door has to be closed.
6 Paper type mismatching. Modify the paper type setting by choosing Control Panel >
Printer > HiTi 640DL > Properties > Paper type. Choose
PhotoDésirée as paper type if you are printing using the
PhotoDésirée application.
hiti640.book Page 45 Monday, June 24, 2002 2:46 PM