Honeywell 4820 Scanner User Manual


 
7 - 9
Page Mapping of Printed Barcodes on page A-6), and scan the value and the
Save barcode from the Programming Chart on the inside the back cover of this
manual. The data characters should then appear properly.
Interleaved 2 of 5
< Default All Interleaved 2 of 5 Settings >
Interleaved 2 of 5
Check Digit
No Check Digit indicates that the image scanner reads and transmits barcode
data with or without a check digit.
When Check Digit is set to Validate, but Don’t Transmit, the unit only reads
Interleaved 2 of 5 barcodes printed with a check digit, but will not transmit the
check digit with the scanned data.
Code 39 Code Page
* On
Off